![CAT 42-22 TT/ECON](links/products/images/cattabletop.png)
Table Top (Vertical Flow)
CAT 42-22 TT/ECON
Please Call for Pricing
Class 100 Single Pass, Table Top, Vertical Flow Workstation
- 1) Top mounted fan/filter modules
- (1) Each FTE 2442-3LO Economy Fan/Filter unit
- OD 23 5/8”w x 41 5/8”l x 12”h
- The motor pack is constructed of 14 ga, anodized aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 650 CFM @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
- Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Integral plastic laminate work surface
- Corner mounted light fixture, 3’ long, mounted to rear tubing
- Anodized aluminum angle on top of frame to hold filter unit
- Unit mounted control box w/ minihelic pressure gauge & switches for light & fan
- Dimensions
- 45 1/2”w x 46”h x 26”d overall
- 42”w x 30”h x 24”d interior
- Frame back panel to be 20 white painted steel
- Sides to be ¼” opaque white acrylic
- Front to have 18” high, hinged shield of ¼” clear polycarbonate w/ SS piano hinge
- No work surface
Class 100 Single Pass, Table Top, Vertical Flow Workstation
- 1) Top mounted fan/filter modules
- (1) Each FTE 2442-3LO Economy Fan/Filter unit
- OD 23 5/8”w x 41 5/8”l x 12”h
- The motor pack is constructed of 14 ga, anodized aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 650 CFM @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
- Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Integral plastic laminate work surface
- Corner mounted light fixture, 3’ long, mounted to rear tubing
- Anodized aluminum angle on top of frame to hold filter unit
- Unit mounted control box w/ minihelic pressure gauge & switches for light & fan
- Dimensions
- 45 1/2”w x 46”h x 26”d overall
- 42”w x 30”h x 24”d interior
- Frame back panel to be 20 white painted steel
- Sides to be ¼” opaque white acrylic
- Front to have 18” high, hinged shield of ¼” clear polycarbonate w/ SS piano hinge
- No work surface
![CAT 422 TT/ECON](links/products/images/cattabletop.png)
Table Top (Vertical Flow)
CAT 422 TT/ECON
Please Call for Pricing
Class 100 Single Pass, Table Top, Vertical Flow Workstation
- Top mounted FTE 2448-3LO Economy Fan/Filter unit
- OD 23 5/8”w x 47 5/8”l x 12”h
- The motor pack is constructed of 14 ga, anodized aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 720 CFM @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
- Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Integral plastic laminate work surface
- Corner mounted light fixture, 3’ long, mounted to rear tubing
- Anodized aluminum angle on top of frame to hold filter unit
Unit mounted control box w/ minihelic pressure gauge & switches for light & fan Dimensions
- 51 1/2”w x 46”h x 26”d overall
- 48”w x 30”h x 24”d interior
- Frame back panel to be 20 white painted steel
- Sides to be ¼” opaque white acrylic
- Front to have 18” high, hinged shield of ¼” clear polycarbonate w/ SS piano hinge
- No work surface
Class 100 Single Pass, Table Top, Vertical Flow Workstation
- Top mounted FTE 2448-3LO Economy Fan/Filter unit
- OD 23 5/8”w x 47 5/8”l x 12”h
- The motor pack is constructed of 14 ga, anodized aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 720 CFM @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
- Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Integral plastic laminate work surface
- Corner mounted light fixture, 3’ long, mounted to rear tubing
- Anodized aluminum angle on top of frame to hold filter unit
Unit mounted control box w/ minihelic pressure gauge & switches for light & fan Dimensions
- 51 1/2”w x 46”h x 26”d overall
- 48”w x 30”h x 24”d interior
- Frame back panel to be 20 white painted steel
- Sides to be ¼” opaque white acrylic
- Front to have 18” high, hinged shield of ¼” clear polycarbonate w/ SS piano hinge
- No work surface
![CAT 4302 TT/ECON](links/products/images/cattabletop.png)
Table Top (Vertical Flow)
CAT 4302 TT/ECON
Please Call for Pricing
Class 100 Single Pass, Table Top, Vertical Flow Workstation
- (1) Top mounted fan/filter modules
- (1) Each FTE 2448-3LO Economy Fan/Filter unit
- OD 23 5/8”w x 47 5/8”l x 12”h
- The motor pack is constructed of 14 ga, anodized aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 720 CFM @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted
- Integral plastic laminate work surface
- Corner mounted light fixture, 3’ long, mounted to painted steel spacer at rear upper corner
- Anodized aluminum angle on top of frame to hold filter unit
Unit mounted control box w/ minihelic pressure gauge & switches for light & fan Dimensions
- 51 1/2”w x 78”h x 32”d overall
- 48”w x 30”h x 30”d interior
- Frame back panel to be 20 white painted steel
- Sides to be ¼” opaque white acrylic
- Front to have 18” high, hinged shield of ¼” clear polycarbonate w/ SS piano hinge
- No work surface
Class 100 Single Pass, Table Top, Vertical Flow Workstation
- (1) Top mounted fan/filter modules
- (1) Each FTE 2448-3LO Economy Fan/Filter unit
- OD 23 5/8”w x 47 5/8”l x 12”h
- The motor pack is constructed of 14 ga, anodized aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 720 CFM @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted
- Integral plastic laminate work surface
- Corner mounted light fixture, 3’ long, mounted to painted steel spacer at rear upper corner
- Anodized aluminum angle on top of frame to hold filter unit
Unit mounted control box w/ minihelic pressure gauge & switches for light & fan Dimensions
- 51 1/2”w x 78”h x 32”d overall
- 48”w x 30”h x 30”d interior
- Frame back panel to be 20 white painted steel
- Sides to be ¼” opaque white acrylic
- Front to have 18” high, hinged shield of ¼” clear polycarbonate w/ SS piano hinge
- No work surface
![CAT 6302SFE/ECON](links/products/images/newcat.jpg)
CAT Series - Economy
CAT 6302SFE/ECON
Please Call for Pricing
Class 100 Single Pass Workstation
1) Top mounted fan/filter modules
2) Each FTE 23-3LO Economy Fan/Filter unit
- In order to replace the hepa filter, the motor pack must be removed from the filter
- OD 23 5/8”w x 35 5/8”l x 12”h
- The motor pack is constructed of 14 ga, mill aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 600 CFM each @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear & (1) side panel to be ¼” clear acrylic in anodized aluminum trim
- (1) Side to be 60 mil x 6” wide x 30” long, clear, antistatic strip curtains
- (1) 4’Corner mounted painted steel teardrop light fixture mounted to white aluminum filler panel
- Control panel w/ switches for lights & motors
3) Integral work surface @ 42” high
- Constructed of lower 1 ¾” welded steel tubing, white epoxy painted w/ solid type 304 SS top
4) Dimensions
- 75”w x 92”h x 36”d overall
- 71”w x 36”h x 30”d interior
Class 100 Single Pass Workstation
1) Top mounted fan/filter modules
2) Each FTE 23-3LO Economy Fan/Filter unit
- In order to replace the hepa filter, the motor pack must be removed from the filter
- OD 23 5/8”w x 35 5/8”l x 12”h
- The motor pack is constructed of 14 ga, mill aluminum using motorized impeller type blower
with (2) 100W, 110V, 1.0 FLA motor & electronic speed control w/ off setting, developing 600 CFM each @ 0.4” SP
- 99.99% hepa filter
- Top mounted disposable prefilters
- Integral white painted, expanded metal grille
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear & (1) side panel to be ¼” clear acrylic in anodized aluminum trim
- (1) Side to be 60 mil x 6” wide x 30” long, clear, antistatic strip curtains
- (1) 4’Corner mounted painted steel teardrop light fixture mounted to white aluminum filler panel
- Control panel w/ switches for lights & motors
3) Integral work surface @ 42” high
- Constructed of lower 1 ¾” welded steel tubing, white epoxy painted w/ solid type 304 SS top
4) Dimensions
- 75”w x 92”h x 36”d overall
- 71”w x 36”h x 30”d interior
![EL322TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL322TT
Please Call for Pricing
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
The blower box is located above the work surface
-Work area 36”w x 22 ½”h x 22”d
-OD 38”w x 46”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 600 CFM,
with electronic speed control, (1) 1/3 HP, 110V motor, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-Perforated, anodized aluminum hepa grille
-Plastic laminate work surface
-35% disposable prefilter mounted in an aluminum grille on the blower box
-Top & sides of working area surrounded by ¼” clear polycarbonate
w/ anodized aluminum trim
-100 FC removable florescent light fixture
-Control panel with switches for motor & lights
& pressure gauge for HEPA filter
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
The blower box is located above the work surface
-Work area 36”w x 22 ½”h x 22”d
-OD 38”w x 46”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 600 CFM,
with electronic speed control, (1) 1/3 HP, 110V motor, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-Perforated, anodized aluminum hepa grille
-Plastic laminate work surface
-35% disposable prefilter mounted in an aluminum grille on the blower box
-Top & sides of working area surrounded by ¼” clear polycarbonate
w/ anodized aluminum trim
-100 FC removable florescent light fixture
-Control panel with switches for motor & lights
& pressure gauge for HEPA filter
![EL3302TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL3302TT
Please Call for Pricing
![EL422TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL422TT
Please Call for Pricing
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
-The blower box is located above the work surface
-Work area 48”w x 22 ½”h x 22”d
-OD 50”w x 46”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 FPM filter face velocity, 800 CFM,
with electronic speed control,
-(1) 1/3 HP, 110V motors, vibration isolated
-Rear loading 99.99% gasket seal hepa filter
-35% Disposable prefilter mounted in an aluminum grille on the blower box
-Plastic laminate work surface
-Canopy of ¼” clear polycarbonate w/ anodized aluminum trim
-Removable, perforated anodized aluminum hepa grille
-100 FC, florescent light fixture
-Control panel with switches for motor & lights
& pressure gauge for HEPA filter
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
-The blower box is located above the work surface
-Work area 48”w x 22 ½”h x 22”d
-OD 50”w x 46”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 FPM filter face velocity, 800 CFM,
with electronic speed control,
-(1) 1/3 HP, 110V motors, vibration isolated
-Rear loading 99.99% gasket seal hepa filter
-35% Disposable prefilter mounted in an aluminum grille on the blower box
-Plastic laminate work surface
-Canopy of ¼” clear polycarbonate w/ anodized aluminum trim
-Removable, perforated anodized aluminum hepa grille
-100 FC, florescent light fixture
-Control panel with switches for motor & lights
& pressure gauge for HEPA filter
![EL4302TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL4302TT
Please Call for Pricing
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
The blower box is located above the work surface
-Work area 60”w x 28 ½”h x 22”d
-OD 62”w x 52”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1250 CFM,
with electronic speed control, (1) 1/2 HP, 110V motors, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-Removable, perforated, anodized aluminum hepa grille
-35% disposable prefilter mounted in an aluminum grille on the blower box
-100 FC removable florescent light fixture
-Work area surrounded by shield of ¼” clear polycarbonate
attached to anodized aluminum trim w/ SS nuts & bolts
-Control panel with switches for motor & lights
& pressure gauge for HEPA filter
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
The blower box is located above the work surface
-Work area 60”w x 28 ½”h x 22”d
-OD 62”w x 52”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1250 CFM,
with electronic speed control, (1) 1/2 HP, 110V motors, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-Removable, perforated, anodized aluminum hepa grille
-35% disposable prefilter mounted in an aluminum grille on the blower box
-100 FC removable florescent light fixture
-Work area surrounded by shield of ¼” clear polycarbonate
attached to anodized aluminum trim w/ SS nuts & bolts
-Control panel with switches for motor & lights
& pressure gauge for HEPA filter
![EL522TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL522TT
Please Call for Pricing
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
The blower box is located above the work surface
-Work area 72”w x 22 ½”h x 22”d
-OD 74”w x 46”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1200 CFM,
with electronic speed control, (2) 1/3 hp,110V motors, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-35% disposable prefilter mounted in an aluminum grille on the blower box
-100 FC removable florescent light fixture
-Work area surrounded by shield of ¼” clear polycarbonate
attached to anodized aluminum trim w/ SS nuts & bolts
-Control panel with switches for motor
& lights & pressure gauge for HEPA filter
-Laminated particleboard construction with all exposed surfaces covered
in white plastic laminate all interior surfaces sealed with paint.
The blower box is located above the work surface
-Work area 72”w x 22 ½”h x 22”d
-OD 74”w x 46”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1200 CFM,
with electronic speed control, (2) 1/3 hp,110V motors, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-35% disposable prefilter mounted in an aluminum grille on the blower box
-100 FC removable florescent light fixture
-Work area surrounded by shield of ¼” clear polycarbonate
attached to anodized aluminum trim w/ SS nuts & bolts
-Control panel with switches for motor
& lights & pressure gauge for HEPA filter
![EL5302TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL5302TT
Please Call for Pricing
NO SPEC AVAILABLE AT THIS MOMENT
NO SPEC AVAILABLE AT THIS MOMENT
![EL622TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL622TT
Please Call for Pricing
NO SPEC AVAILABLE AT THIS MOMENT
NO SPEC AVAILABLE AT THIS MOMENT
![EL6302TT](links/products/images/tabletopunit.jpg)
Table Top
EL6302TT
Please Call for Pricing
-Laminated particleboard construction with all exposed surfaces covered in white plastic laminate
all interior surfaces sealed with paint. The blower box is located above the work surface
-Work area 72”w x 28 ½”h x 22”d
-OD 74”w x 52”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1500 CFM, with electronic speed control,
(2) 1/3 hp,110V motors, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-35% disposable prefilter mounted in an aluminum grille on the blower box
-100 FC removable florescent light fixture
-Work area surrounded by shield of ¼” clear polycarbonate attached to anodized aluminum trim w/ SS nuts & bolts
-Control panel with switches for motor & lights & pressure gauge for HEPA filter
-Laminated particleboard construction with all exposed surfaces covered in white plastic laminate
all interior surfaces sealed with paint. The blower box is located above the work surface
-Work area 72”w x 28 ½”h x 22”d
-OD 74”w x 52”h x 34 ½”d
-Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1500 CFM, with electronic speed control,
(2) 1/3 hp,110V motors, vibration isolated
-Rear loading 99.99% gasket seal HEPA filter
-35% disposable prefilter mounted in an aluminum grille on the blower box
-100 FC removable florescent light fixture
-Work area surrounded by shield of ¼” clear polycarbonate attached to anodized aluminum trim w/ SS nuts & bolts
-Control panel with switches for motor & lights & pressure gauge for HEPA filter
![EL6302TT](links/products/images/tabletopunit.jpg)
Table Top (Horizontal Flow)
EL6302TT
Please Call for Pricing
TABLE TOP CLEAN BENCH
- 16 Gauge Painted Steel with all exposed surfaces covered in white plastic laminate all interior surfaces sealed with paint. The blower box is located above the work surface
- Work area 72”w x 28 ½”h x 22”d
- OD 74”w x 52”h x 34 ½”d
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1500 CFM, with electronic speed control, (1) 1/2 HP,110V motors, vibration isolated
- Rear loading 99.99% gasket seal HEPA filter
- Plastic laminate work surface
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- 100 fc removable fluorescent light fixture
- Work area surrounded by shield of ¼” clear polycarbonate attached to anodized aluminum trim w/ SS nuts & bolts
- Control panel with switches for motor & lights & pressure gauge for HEPA filter
TABLE TOP CLEAN BENCH
- 16 Gauge Painted Steel with all exposed surfaces covered in white plastic laminate all interior surfaces sealed with paint. The blower box is located above the work surface
- Work area 72”w x 28 ½”h x 22”d
- OD 74”w x 52”h x 34 ½”d
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1500 CFM, with electronic speed control, (1) 1/2 HP,110V motors, vibration isolated
- Rear loading 99.99% gasket seal HEPA filter
- Plastic laminate work surface
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- 100 fc removable fluorescent light fixture
- Work area surrounded by shield of ¼” clear polycarbonate attached to anodized aluminum trim w/ SS nuts & bolts
- Control panel with switches for motor & lights & pressure gauge for HEPA filter