![CAT 3302 PVE/ST](links/products/images/newcat.jpg)
CAT Series
CAT 3302 PVE/ST
Please Call for Pricing
Clean Bench - Class 100 - Full Exhausting
1) Top mounted fan/filter module
- Constructed of 16 ga, white epoxy painted steel
- Direct drive motor blower w/ (1) 1/2 HP, 110V, motor & electronic speed control developing 1200 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (1) 30" x 36" x 3", 95% Ashre, 2 3/4" separatorless media, gasket seal, aluminum frame
- Front mounted 35% disposable prefilters in anodized aluminum hinged grilles for incoming air
- 100 FC lighting hepa mounted to the front & back of the filter unit
- Perforated anodized aluminum diffuser w/ center slot open
- Control panel w/ switches for light & motor, pressure gauge for supply filter
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded SS tubing w/ levelers
- Rear panel to be painted steel
- Side panels to be 1/4" clear acrylic in anodized aluminum mounting trim
- Panels are sized for working area of 28 1/2" high
- Front hinged shield, 18" high
3) Independent worktable, 36" high
- Constructed of tubular, painted steel with 8" deep exhaust plenum
- Work deck of 16 ga, type 304 SS, fully perforated & supported from below
- Lower, washable prefilter below work surface
- No lower base cabinet
4) Rear exhaust duct
- 4" x 24"
- Constructed of 20 ga, painted steel
- Top mounted, manually operated exhaust & recirc dampers
5) Dimensions
- 40"w x 96"h x 36 1/2"d overall
- 35"w x 28 1/2" h x 30"d interior
Clean Bench - Class 100 - Full Exhausting
1) Top mounted fan/filter module
- Constructed of 16 ga, white epoxy painted steel
- Direct drive motor blower w/ (1) 1/2 HP, 110V, motor & electronic speed control developing 1200 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (1) 30" x 36" x 3", 95% Ashre, 2 3/4" separatorless media, gasket seal, aluminum frame
- Front mounted 35% disposable prefilters in anodized aluminum hinged grilles for incoming air
- 100 FC lighting hepa mounted to the front & back of the filter unit
- Perforated anodized aluminum diffuser w/ center slot open
- Control panel w/ switches for light & motor, pressure gauge for supply filter
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded SS tubing w/ levelers
- Rear panel to be painted steel
- Side panels to be 1/4" clear acrylic in anodized aluminum mounting trim
- Panels are sized for working area of 28 1/2" high
- Front hinged shield, 18" high
3) Independent worktable, 36" high
- Constructed of tubular, painted steel with 8" deep exhaust plenum
- Work deck of 16 ga, type 304 SS, fully perforated & supported from below
- Lower, washable prefilter below work surface
- No lower base cabinet
4) Rear exhaust duct
- 4" x 24"
- Constructed of 20 ga, painted steel
- Top mounted, manually operated exhaust & recirc dampers
5) Dimensions
- 40"w x 96"h x 36 1/2"d overall
- 35"w x 28 1/2" h x 30"d interior
![CAT 3302-TT-PR-ST](links/products/images/newcat.jpg)
CAT Series
CAT 3302-TT-PR-ST
Please Call for Pricing
![CAT 4302 PDE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 4302 PE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 4302 PR](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 4302 PVE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 4302 SFE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 5302 PDE](links/products/images/newcat.jpg)
CAT Series
CAT 5302 PDE
Please Call for Pricing
Class 100 Single pass Vertical Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (1) 1/2 HP, 110v, motor & electronic speed control developing 1250 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (1) 30" x 60" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal, aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non-adjustable
- 100 FC fluorescent lighting w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear & side panels to be 20 ga, white painted steel
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of 16 ga, type 304 SS, fully perforated
4) Factory testing w/ documents shipping with unit
5) Dimensions
- 64”w x 96”h x 36”d overall
- 60”w x 28 ½”h x 30”d interior
Class 100 Single pass Vertical Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (1) 1/2 HP, 110v, motor & electronic speed control developing 1250 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (1) 30" x 60" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal, aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non-adjustable
- 100 FC fluorescent lighting w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear & side panels to be 20 ga, white painted steel
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of 16 ga, type 304 SS, fully perforated
4) Factory testing w/ documents shipping with unit
5) Dimensions
- 64”w x 96”h x 36”d overall
- 60”w x 28 ½”h x 30”d interior
![CAT 5302 PE](links/products/images/newcat.jpg)
CAT Series
CAT 5302 PE
Please Call for Pricing
Class 100 Exhausting Vertical Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (1) 1/2 HP, 110v, motor & electronic speed control developing 1250 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (1) 30" x 60" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal, aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non-adjustable
- 100 FC fluorescent lighting w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear & side panels to be 20 ga, white painted steel
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of 16 ga, type 304 SS, fully perforated w/ lower 8” deep exhaust plenum
- Bottom lower cabinet w/ (2) hinged & gasketed doors, vented to the exhaust
4) Rear exhaust duct
- 4" x 24"
- Constructed of 14 ga, white painted steel
5) Factory testing w/ documents shipping with unit
6) Dimensions
- 64”w x 96”h x 36”d overall
- 60”w x 28 ½”h x 30”d interior
Class 100 Exhausting Vertical Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (1) 1/2 HP, 110v, motor & electronic speed control developing 1250 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (1) 30" x 60" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal, aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non-adjustable
- 100 FC fluorescent lighting w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear & side panels to be 20 ga, white painted steel
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of 16 ga, type 304 SS, fully perforated w/ lower 8” deep exhaust plenum
- Bottom lower cabinet w/ (2) hinged & gasketed doors, vented to the exhaust
4) Rear exhaust duct
- 4" x 24"
- Constructed of 14 ga, white painted steel
5) Factory testing w/ documents shipping with unit
6) Dimensions
- 64”w x 96”h x 36”d overall
- 60”w x 28 ½”h x 30”d interior
![CAT 5302 PR](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 5302 PVE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 5302 SFE](links/products/images/newcat.jpg)
CAT Series
CAT 5302 SFE
Please Call for Pricing
![CAT 6302 PDE](links/products/images/newcat.jpg)
CAT Series
CAT 6302 PDE
Please Call for Pricing
Class 100 Single Pass Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (2) 1/3 hp, 110v, motor & electronic speed control developing 1500 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (2) 30" x 36" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal
- Aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non adjustable
- 100 FC fluorescent lighting below hepa w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear panel to be 20 ga, white painted steel
- Side panels of ¼” clear polycarbonate
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of peforated 16 ga, type 304 SS
- No base cabinets
4) Dimensions
- 75”w x 96”h x 32”d overall
- 71”w x 28 ½”h x 30”d interior
Class 100 Single Pass Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (2) 1/3 hp, 110v, motor & electronic speed control developing 1500 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (2) 30" x 36" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal
- Aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non adjustable
- 100 FC fluorescent lighting below hepa w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear panel to be 20 ga, white painted steel
- Side panels of ¼” clear polycarbonate
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of peforated 16 ga, type 304 SS
- No base cabinets
4) Dimensions
- 75”w x 96”h x 32”d overall
- 71”w x 28 ½”h x 30”d interior
![CAT 6302 PE](links/products/images/newcat.jpg)
![CAT 6302 PR](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 6302 PVE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 6302 SFE](links/products/images/newcat.jpg)
CAT Series
CAT 6302 SFE
Please Call for Pricing
Class 100 Single Pass Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (2) 1/3 hp, 110v, motor & electronic speed control developing 1500 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (2) 30" x 36" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal
- Aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non adjustable
- 100 FC fluorescent lighting below hepa w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear panel to be 20 ga, white painted steel
- Side panels of ¼” clear polycarbonate
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of solid 16 ga, type 304 SS
- No base cabinets
4) Dimensions
- 75”w x 96”h x 32”d overall
- 71”w x 28 ½”h x 30”d interior
Class 100 Single Pass Workstation
1) Top mounted fan/filter module
- Constructed of 16ga epoxy painted steel
- Direct drive motor blower w/ (2) 1/3 hp, 110v, motor & electronic speed control developing 1500 CFM to twice the clean hepa filter SP, vibration isolated
- Hepa filter to be (2) 30" x 36" x 3", 99.99% scan tested using PSL & laser particle counter, 2" separatorless media, gasket seal
- Aluminum frame, center divider w/ (2) plugged ports for upstream concentration readings
- Front mounted 35% disposable prefilters in aluminum hinged grilles for incoming air, non adjustable
- 100 FC fluorescent lighting below hepa w/ acrylic eggcrate diffuser
- Control panel w/ switches for light & motor, pressure gauge for supply hepa filter, plugged port for adjustment of speed control
2) Tubular steel support framework
- 1 3/4" x 1 3/4" x 16 ga welded steel tubing, white epoxy painted w/ levelers
- Rear panel to be 20 ga, white painted steel
- Side panels of ¼” clear polycarbonate
- Aluminum angle on top of frame to hold filter unit
3) Independent worktable, 36” high
- Constructed of 16 ga epoxy painted steel
- Work deck of solid 16 ga, type 304 SS
- No base cabinets
4) Dimensions
- 75”w x 96”h x 32”d overall
- 71”w x 28 ½”h x 30”d interior
![CAT 8302 PDE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 8302 PE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 8302 PR](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 8302 PVE](links/products/images/newcat.jpg)
NO SPEC AVAILABLE AT THIS MOMENT
![CAT 8302 SFE](links/products/images/newcat.jpg)
CAT Series
CAT 8302 SFE
Please Call for Pricing